English Deutsch
Produkti

PTR 1300 / 1600L / 1600LH / 1600XLH


PRESSURE TESTER FOR CYLINDER HEADS AND BLOCKS COOLANT CIRCUITS

The PTR hydraulic pressure tester or test bench allows for the quick and easy detection of fissures and cracks and the water tightness control in the cooling circuits of cylinder heads and engine blocks.

The pressure tester works following a basic principle that consists of plugging all the outlets of the cooling circuit of the cylinder head using rubber stoppers and then injecting pressurized air into the circuit. The cylinder head is then immersed in a hot-water bath and if it contains any cracks or fissures, a stream of air bubbles will be observed rising to the surface of the bath.

The machine has been specially designed for continuous use and is comfortable and simple to operate. Furthermore, the machine requires a minimum amount of maintenance and comes fully equipped with high quality, in-built security features.

The pressure tester is fitted with a programmable heater which allows the water to be preheated on a daily basis.The temperature of the water is regulated by means of an electronic thermostat control.

Hydraulic arms move the cradle holding the piece to be tested. The cradle is moved vertically by means of a hydraulic system. The cradle can also rotate a full 360 degrees making it far easier to check all sides of the cylinder head from every angle.

The water tank and lid are both thermally insulated thus preventing heat loss and substantially reducing operational costs of the machine.The water is heated by means of two 4.5kW elements.The machine is fitted with a safety mechanism that controls the level of the water.

In order to avoid possible injury and unnecessary risks, the operating circuit of the machine is 24 V low voltage.


images1PTR 1600 VIDEO



Specifications - PTR 1300
 
Maximum Cylinder Head Capacity
1200x335x300(h) mm
Maximum Cylinder Head Weight
300 kg
Stainless Steel Tank Capacity
485 l
Maximum Cradle Stroke
495 mm
Heating Elements
2 x 4,5 kW
Adjustable Working Temperature
0 - 90° C
Rotation Speed
4 RPM
Cradle Up-Down Speed
60 mm/sec
Hydraulic Unit Power
0,75 kW
Rotation Motor Power
0,18 kW
Machine Dimensions (LxWxH)
1920x1000x1800 mm
Packing Dimensions (LxWxH)
2200x1350x1450 mm
Weight
460 kg
Gross Shipping Weight approx.
565 kg
Environment Conditions: (temperature/humidity)
10-30° C / 15-90% RH
Specifications - PTR 1600L
 
Maximum Cylinder Head Capacity
1350x395x300(h) mm
Maximum Cylinder Head Weight
300 kg
Stainless Steel Tank Capacity
590 l
Maximum Cradle Stroke
600 mm
Heating Elements
2 x 4,5 kW
Adjustable Working Temperature
0 - 90° C
Rotation Speed
4 RPM
Cradle Up-Down Speed
60 mm/sec
Hydraulic Unit Power
0,75 kW
Rotation Motor Power
0,18 kW
Machine Dimensions (LxWxH)
1920x1050x1800 mm
Packing Dimensions (LxWxH)
2220x1400x1450 mm
Weight
510 kg
Gross Shipping Weight approx.
735 kg
Environment Conditions: (temperature/humidity)
10-30° C / 15-90% RH
Specifications - PTR 1600LH
 
Maximum Cylinder Head Capacity
1350x395x410(h) mm
Maximum Cylinder Head Weight
300 kg
Stainless Steel Tank Capacity
632 l
Maximum Cradle Stroke
600 mm
Heating Elements
2 x 4,5 kW
Adjustable Working Temperature
0 - 90° C
Rotation Speed
4 RPM
Cradle Up-Down Speed
60 mm/sec
Hydraulic Unit Power
0,75 kW
Rotation Motor Power
0,18 kW
Machine Dimensions (LxWxH)
1920x1100x1800 mm
Packing Dimensions (LxWxH)
2220x1400x1500 mm
Weight
615 kg
Gross Shipping Weight approx.
770 kg
Environment Conditions: (temperature/humidity)
10-30° C / 15-90% RH
Specifications - PTR 1600XLH
 
Maximum Cylinder Head Capacity
1350x460x410(h) mm
Maximum Cylinder Head Weight
300 kg
Stainless Steel Tank Capacity
710 l
Maximum Cradle Stroke
550 mm
Heating Elements
2 x 4,5 kW
Adjustable Working Temperature
0 - 90° C
Rotation Speed
4 RPM
Cradle Up-Down Speed
60 mm/sec
Hydraulic Unit Power
0,75 kW
Rotation Motor Power
0,18 kW
Machine Dimensions (LxWxH)
1920x1200x1800 mm
Packing Dimensions (LxWxH)
2220x1400x1500 mm
Weight
660 kg
Gross Shipping Weight approx.
905 kg
Environment Conditions: (temperature/humidity)
10-30° C / 15-90% RH
 

print page back